You have to hand it to Lowrance when it comes to the name of their new entry-level line of sonar and chartplotters. We all want to hook up, and what better way to do that then by having our marine electronics reveal to us where the fish are?
 |
| Hook2 vs Hook Reveal |
But is the product as good as the name, or are we simply seeing the older Hook2 re-packaged with a new name? In this article we will dive into the technical differences, and try to decipher those into what really counts, how those differences can impact your fishing and boating.
 |
| Hook Reveal in three sizes |
For those who don`t like to read, we can sum up the main differences right now:
- FishReveal
- Genesis Live
- Better transducers
 |
| Lowrance line-up 2020 |
What the above list does not mention, is that the x-versions of Hook2 continues into 2020, as an even more budget-friendly alternative then Hook Reveal. Hook Reveal is available in these configurations unit/ transducer in Europe (see comment below for the US):
 |
| Hook Reveal overview |
The above overview might look like Navionics is out of the question, but it is not. The point is that Genesis Live only works with AT5-based mapping (like the preloaded map, C-Map navigational maps, C-Map Genesis or your very own maps made with Reefmaster.) Hook Reveal will even have Navionics Sonarcharts Live (like Elite Ti2 and HDS does), so if Navionics is your preferred mapping, you can still use live-mapping with Hook Reveal. Keep in mind that Hook Reveal is still entry-level though, and live-mapping is hard work on the units processor.
All of the Hook Reveal variations sold in Europe have 2D, DownScan and a "proper" chartplotter. (No x-models, those will live on as Hook2 though - once again a change we like). But in the US, Lowrance continues with ther "GPS-units", the x-models, which will undoubtfully leave a trail of unhappy customers who buys the x-models and then get disappointed when they find out there is no way to get mapping besides Genesis Live on those.
TripleShot-versions (7 TripleShot and 9 TripleShot) will also have SideScan, but more on that under Transducers. Hook Reveal will be available as "portable pack" or "ice combo" for those who prefer to use their units outside of their own boat.
Units - hardware
Looking at the housing, there are some subtle changes. Where some of the Hook2-units had the memorycard on the front, only covered with the rubber Lowrance-logo, Hook Reveal in 5 and 7 has the memorycard in a more sheltered location on the side of the unit. For Hook Reveal 9 the memorycard is in front behind a latch as we are used to from HDS:
 |
| Details on Hook Reveal 9 |
One thing we would like to have seen updated, is the push-style connectors on Hook2:
 |
| Push-style connectors on Hook2 - continues on Hook Reveal |
As for sizes, Hook Reveal comes in 5, 7 and 9, all with a widescreen-like orientation. The 4 and 12 from Hook2 is not continued, and from our viewpoint that is a good thing. The 4 was simply too small with the widescreen-like screen (unlike the older Hook where 4 was portrait-style and made sense, I still use one of those for ice-fishing) and the 12 might be good value for the screensize but if you think about spending that much the Elite Ti2 will probably suit your needs better anyway.
The screens used on Hook Reveal is the same as on Hook2:
 |
| Hook Reveal screen-resolution, nits and draw. |
Units -software
As you have just read, there is not much happening with the units house and screen. But there is quite a bit of change on the software, enabling FishReveal and Genesis Live.
FishReveal is simply put the fish-arches from 2D overlaid on the DownScan-image. This might sound like a FishID-clone, but it is not. FishReveal has been a feature on Elite Ti/Ti2 and HDS for a few years, and is proven technology which we are especially fond of in a single-unit setup. (As opposed to having several units.) Single unit setups is exactly what we think most Hook Reveal users will use, and the really good thing with FishReveal is that you now get all the info you want from directly under your boat from looking at just DownScan, not having to do 2D and DownScan in a split screen. Since we are big fans of dividing our screen in chart and sonar, we now run chart and DownScan (with FishReveal) and end up with more usable screen-realestate then before.
 |
| DownScan with FishReveal. |
 |
| Genesisi Live in action. |
Under Units - Hardware we mentioned new palettes for StructureScan making some users claim the screen itself has improved. The screens are the same as on Hook2, but the new palettes give you images almost as good as Active Imaging on the more expensive Elite Ti2 and HDS.
 |
| Hook Reveal SideScan (photo; lowrance.com) |
2D is also improved on Hook Reveal versus Hook2. Hook Reveal supports more frequencies, including 50kHz, and thus a lot more transducers. Hook Reveal Tripleshot is also compatible with "Active Imaging 3 in 1", greatly improving 2D over the rather crap Tripleshot-transducer. (Adapter SKU 000-14069-001 is needed). But more on that as wee look at transducers.
Transducers
My main complaint with Hook2 was the 2D-elements used in the transducers (Bullet, SplittShot and TripleShot). I get the point, the extremely wide coneangle of over 40 degrees at 200 kHz made every Hook2-owner see arches, almost regardless of how bad they mounted their transducer. But the downside to extremely wide coneangle on 2D is that you have no idea where those fish are within the cone, bottom-composition and structure get averaged out to a point where it is hard to tell what you are looking at, and the combination of low power and wide coneangle makes for poor performance while on-plane or over deeper water than 30-is feet. In short, the Hook2-transducers where aimed at the shallow water-bass angler who did not care about on-plane performance. Most anglers did not fit the bill...
We and others addressed this with Lowrance from day one, and with Hook Reveal they really did pull through and made big changes to all but one of the transducers.
We and others addressed this with Lowrance from day one, and with Hook Reveal they really did pull through and made big changes to all but one of the transducers.
TripleShot unfortunately goes on unchanged, but the 83/200-HDI is upgraded and we have a new 50/200-HDI:
 |
| Hook Reveal transducers |
Both the HDI-versions are the same as we have had for a few years on HDS and Elite, only with new connectors and some simplification of the housing. These have been producing good sonar for years, and we are happy to see them applied to the Hook Reveal range.
Here are few photos from our (so far short) testing with Hook Reveal, in this case a 5 SplitShot/ HDI with 50/200-HDI. Depth in meters on all photos and screenshots, so multiply by three to get feet:
We will follow up with more testing and screenshots as we get some more time with Hook Reveal, so far we have only had a couple of hours on it and as you can see the purpouse of that test was to check how it handled deep (salt-)water. Here is a screenshot from a Hook2 7 Splitshot/HDI in similar conditions:
With this kind of deep-water perfomance on an entry-level unit (and transducer) we are confident our future testing in more shallow water will prove Hook Reveal to be a good alternative at this price-point, but stay tuned for more Hook Reveal as the season progress.
Here are few photos from our (so far short) testing with Hook Reveal, in this case a 5 SplitShot/ HDI with 50/200-HDI. Depth in meters on all photos and screenshots, so multiply by three to get feet:
 |
| On our way towards the deep. |
 |
| No issues at close to 600 feet in high chirp. |
 |
| No issues in low chirp either, and note that this is in auto-mode, no manual tinkering. |
 |
| Hook 2 Splitshot |
For those who want both SideScan and good 2D, the TripleShot can be upgraded to TotalScan using adapter 000-14069-001 for Hook2 and Hook Reveal, and Active Imaging 3 in 1 for Hook Reveal. (The same adapter as used with Hook2, SKU 000-14069-001.) The downside to that is by the time you have bought both the Hook Reveal TripleShot, the adapter and the TotalScan or AI 3i1, you are so close to the price of Elite Ti2 with Active Imaging 3 in 1 that the discussion to trade up will be mostly academic.
Unfortunately, Lowrance will continue to use Splitshot as the transducer bundled with Hook Reveal in the US, which is just bad judgement. The 83/200-HDI is what you want, regardless of how you fish or how deep, it is just that much better compared to Splitshot. The 83/200-HDI can be ordered as a separate transducer though, the SKU for it is 000-15640-001 and I highly recommend it as an upgrade over SplitShot.
Conclusion
Hook Reveal is what Hook2 should have been from the start, and Lowrance seems to have corrected most of the things we did not like with Hook2.
We would like to see a new TripleShot-transducer, or at least the Hook Reveal TripleShot sold as a bundle with TotalScan or AI 3i1 and adapter, and we would like to see the push-connectors replaced with screw-on connectors. We would also like to see the range of Hook Reveal in the US without the x-units and without Splitshot, just to simplify and ensure the consumer knows what they are buying. But apart from that, Lowrance has done a good job on Hook Reveal and brought impressive value to this price-range.
Team Colibri will receive a Hook Reveal for more in-depth (pun intended) testing during 2020, so watch this space for more on Hook Reveal.
PS - Once you have spent the $ and bought a unit, Hook Reveal or other, don`t forget about correct wiring and fuse. More on that in THIS article.
More "VS"-articles:
Hook VS Hook2
HDS Live vs Elite Ti2
More "VS"-articles:
Hook VS Hook2
HDS Live vs Elite Ti2
30 kommentarer
Yes, that was one of the big changes from Hook2 towards Hook Reveal, you can use Genesis Live on Hook Reveal X, as long as you have a memorycard in your unit. (Maximum 32GB, formated to FAT32.) Kr Erik
I'm currently at process of ordering a fish finder for my kayak. I plan on using it on lakes and the sea. For that reason i decided to get Hook reveal 7 TripleShot and add additional transducer to use it in the sea for 2D and down imaging.
I contacted the seller and explained to him I'm looking to order TripleShot unit with additional 2D HDI transducer. I wen't for 000-15640-001 (83/200) transducer, but got info back that I should consider ordering 000-15639-001 (50/200) transducer instead.
I plan on fishing to depths of about 100m in sea. So the dilemma now is which transducer to pick!? Should I go with 83/200 which has wider beam angle or with narrower 50/200!?
Most of the time I will target pelagic fish but if I venture out in to the "deep" I would love to tell the difference between fish and bottom/structure. With pedal proppeled kayak you are quite slow and every found fish counts :).
I'm abble to get Hook reveal 7 TS with additional 50/200 HDI transducer for about 800€.
But after of a bit more of research I came to a interesting cognition.
For about the same price (even a little less actualy) I can get Elite Ti2 with Active Imaging 3in1 transducer.
And if I add another 200€ I can get new Elite FS with Active Imaging 3in1 transducer, which is light years ahead of TripleShot and even has the same 2D element as HST-WSBL if i'm not mistaken.
So for a bit more i gain 4 times: 1. newer superior device, 2. much beter transducer, 3. no need for additional HDI transducer if I decide for 83/200, 4. no push in conector. Dilema!? Maybe not!? I can always add 50/200 or even beter transducer if future calls for it. Any academic thoughts from your side? ;)
I'm struggling to find any good info how Active Imaging 3in1 is performing in saltwater.
I got the feeling with lowrance that as soon you wenture out of their bundle/basic package, things get expencive pretty qiuckly and Lowrance being US company targeting with low/mid priced devices mostly fresh water Bass fishermen, the basic package is not realy adequate for saltwater fishing. But in the end probably most companys are the same. Salwater fishing was always more expensive hobby then fresh water.
Wish you all the best, Mitja.
Cheers
Je possède un Hook reveal 9 tripleshot.
Est ce que je peut installer une sonde hdi 83/200 apparemment l'appareil ne fonctionnerai que en 200?
Merci
Thanks for this great article, what is the max depth for the 83/200 transducer (to see fish and depth)? I fish in waters with 100m depth max I hesitate with 50/200.